2DM50RG

2DM50 is a microcontroller based dot matrix display device for lifts. It can be assembled either to the car or to a level. It can present floor markings, direction arrows and indicators. It accepts a wide range of nominal supply voltages, because it is equipped with a high efficiency switched mode power supply. 3-tone gong sound generator produces different sound depending on direction. Advanced digital filtering enhances robustness in poor signal quality environments.


Functional specifications

 

  • Maximum number of floors is 32
  • Presents floor markings, direction arrows and indicators
  • Supports characters: 0...9, A...Z, space _ - ( ) * + , . / : ;
  • Scrolling of arrows can be made automatically
  • Audible signaling by a standard gong
  • Gong volume adjustment
  • Optionally available with loudspeaker
  • Device configuration menu with 3 push buttons
  • Setup copy function interface

Technical data

  • Operating voltage range, 12…30 VDC
  • Current 75 mA @ 24 VDC (without gong)
  • Physical dimensions are 110 mm x 65 mm x 20 mm
    (+ additional space for connectors)
  • Display resolution: 2 pieces of 5 x 7 led matrixes
  • Active area is 50 mm x 85 mm
  • Viewing angle: min. 60°
  • Color: Red on stock, please inquire for special colors

Interfaces

  • 2DM50 has parallel interface
    • Internal pull-down or pull-up resistors (user configurable)
    • Binary or Gray Coding (user configurable)
    • 2 indicator / arrow control inputs
  • 2DMS50 has VEBUS serial interface
    • Enhanced control possibilities
    • Advantage in cabling

marikoo.fi